Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-1
Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-2
Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-3
Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-4
Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-5
Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover-6

Cybertruck Display Back Overlay | Real Dry Carbon Fiber Center Screen Cover

$259.99

Tesery

Cybertruck Display Back Overlay (2 Pieces)

Real Dry Molded Carbon Fiber

 Elevate your Cybertruck's cabin with a sleek carbon fiber screen upgrade. Upgrade the rear appearance of your Cybertruck’s center screen with our Dry Molded Carbon Fiber Display Back Overlay.

Two pieces of carbon fiber overlay installed on the back of a Cybertruck display.

Performance & Aesthetics

Close-up of the carbon fiber overlay showcasing its perfect contour fit.
Precision Engineered Fit

Precision-molded using a 3D scan of the Cybertruck's center display rear, ensuring factory-like integration with **zero gaps or alignment issues** for a truly OEM look.

Texture of dry molded carbon fiber weave.
Real Dry Molded Carbon Fiber

Made from premium autoclave **dry molded carbon fiber** for maximum strength, lightweight durability, and a luxurious, high-end finish that surpasses standard wet lay-up carbon.

Image showing the overlay being secured with adhesive.
Damage-Free Installation

Installs easily by securing with pre-applied **automotive-grade double-sided tape**—ensuring a clean, damage-free, and permanent fit that won't require screen removal or complex disassembly.

Installation Guide (Quick 5-Minute Install)

  1. Clean the surface: Use a cleaning cloth to thoroughly clean the back of the display and ensure it is completely dry.
  2. Peel off the backing film: Peel off the backing film from the pre-applied adhesive tape on the carbon fiber part.
  3. Align the top: Carefully align and attach the **top** carbon fiber part to the back of the display screen.
  4. Press and fix: Press firmly for 30 seconds. Repeat this alignment and pressing step for the **bottom** part.
    5.
  5. Wait: Avoid high temperatures or washing with water within 24 hours to allow the glue to fully cure.

FAQ

Is the installation easy, and are any tools required?

+

Yes, the installation is designed to be simple and requires **no specialized tools**. The overlays secure easily with pre-applied, automotive-grade double-sided tape (included with a prep kit). The process involves cleaning, aligning, and pressing firmly.

What is the difference between Glossy and Matte finishes?

+

The Glossy (Wet Look) finish has a high-shine, reflective surface protected by a clear coat. The Matte (Dry Look) finish has a non-reflective, satin appearance, which is better for minimizing glare and matching the minimalist OEM aesthetic.

Is the installation permanent? Can I remove it later?

+

The automotive-grade adhesive is designed for a secure, long-lasting hold. While it can be removed with careful application of heat (e.g., a hairdryer), it is intended to be a permanent upgrade, and removal should be done cautiously to avoid damage to the underlying plastic.

In stock!
Carbon Fiber Type: Glossy
Matte